APC UPS 3000VA LCD RM2U 230V UPS
Brand: APC
Product Code: SMT3000RMI2U
Reward Points: 359
Availability: Out Of Stock
Sold By: Aryan InfoTech
KD 359.000

APC UPS 3000VA LCD RM2U 230V UPS

Features

StruxureWare Central compatible 

Enables centralized management via StruxureWare Central.

Predicitive failure notification 

Provides early-warning fault analysis ensuring proactive component replacement.

Wide input voltage range 

Designed for harsh electrical environments to save battery life.

LED Indicators 

Provide easy-to-read status of the unit and utility power conditions.


Boost and Trim Automatic Voltage Regulation (AVR) 

Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.

Serial connectivity 

Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

High online efficiency 

Reduces utlility costs, generates less heat.

Green mode 

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Energy meter 

Provides actual kilowatt hours of usage for energy conscious users.

Predictive replace battery date 

Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Intuitive LCD interface 

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Single switched outlet group 

Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

Pure sine wave output on battery 

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Disconnected battery notification 

Warns when a battery is not available to provide backup power.

Sequenced network shutdown and reboot 

Customize network shutdown and reboot sequence of connected servers and UPSs.

Outlet group control 

Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).


Adjustable voltage sensitivity 

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.


Adjustable voltage-transfer points 

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms 

Provides notification of changing utility power and UPS power conditions

Automatic restart of loads after UPS shutdown 

Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test 

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Cold-start capable 

Provides temporary battery power when the utility power is out.

Hot-swappable batteries 

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Network manageable 

Provides remote power management of the UPS over the network.

Battery failure notification 

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Safety-agency approved 

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Serial connectivity 

Provides management of the UPS via a serial port.

Temperature-compensated battery charging 

Prolongs battery life by regulating the charge voltage according to battery temperature.

USB connectivity 

Provides management of the UPS via a USB port (not available on all models).

User-replaceable batteries 

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Boost and Trim Automatic Voltage Regulation (AVR) 

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Intelligent battery management 

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Frequency and voltage regulation 

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.


Availability

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Disconnected battery notification

Warns when a battery is not available to provide backup power.


Manageability

Network manageable

Provides remote power management of the UPS over the network.

Audible alarms

Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

LED status indicators

Quickly understand unit and power status with visual indicators.

Serial connectivity

Provides management of the UPS via a serial port.

USB connectivity

Provides management of the UPS via a USB port (not available on all models).

Disconnected battery notification

Warns when a battery is not available to provide backup power.


Serviceability

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Predictive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.

Resettable circuit breakers

Enables a quick recovery from overload events.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance


Adaptability


Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.


Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

UPS
Model Rackmount
Capacity 3 KVA

Write a review

Note: HTML is not translated!