Planet 48-Port 10/100/1000T 802.3at POE+ plus 4 shared 100/1000Mbps SFP L2+ Managed Switches with Hardware Layer3 IPv4/IPv6 Static Routing (600Watts)

Specifications

Hardware Specifications
Copper Ports	48 10/100/1000Base-T RJ-45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots	4 100/1000Base-X SFP interfaces, shared with Port-45 to Port-48 Compatible with 100Base-FX SFP transceiver
Console	1 x RJ-45 to RS-232 serial port (115200, 8, N, 1)
Switch Architecture	Store-and-Forward
Switch Fabric	96Gbps / non-blocking
Throughput	71.4 Mpps@64Bytes
Address Table	16K entries, automatic source address learning and ageing
Share Data Buffer	16M bits
Flow Control	IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex
Jumbo Frame	10056bytes
Reset Button	< 5 sec: System reboot > 5 sec: Factory default
Dimensions (W x D x H)	440 x 440 x 44.2 mm, 1U height
LED	System:  　　　Power (Green) 　　　SYS (System, Green) Alert:  　　　Fan Alarm 1 (Red) 　　　Fan Alarm 2 (Red) PoE Ethernet Interfaces (Port 1 to Port 48): 　　　LNK/ACT (10/100/1000Mbps, Green) 　　　PoE-in-Use (Orange) 100/1000Mbps SFP Combo Interfaces (Port 45 to Port 48): 　　　LNK/ACT (100/1000X, Green)
Power Requirements	100-240V AC, 50/60Hz, 12A
Power Consumption	722 watts / 2462 BTU
ESD Protection	2KV DC
Power over Ethernet
PoE Standard	IEEE 802.3af / 802.3at PoE / PSE
PoE Power Supply Type	End-Span
PoE Power Output	Per Port 52V DC, 590mA Max. 30.8 watts
Power Pin Assignment	1/2(+), 3/6(-)
PoE Power Budget	600 watts (max.)@ 25 degrees C
PoE Ability	PD @ 11 watts: 48 units PD @ 15.4 watts: 38 units PD @ 30.8 watts: 19 units
Layer 2 Functions
Port Configuration	Port disable / enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable / enable
Port Status	Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
Port Mirroring	TX / RX / Both Many-to-1 monitor
VLAN	802.1Q Tagged-based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN IP Subnet-based VLAN MVR (Multicast VLAN Registration) GVRP Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation	IEEE 802.3ad LACP / Static Trunk 24 groups of 8-Port trunk support
Spanning Tree Protocol	STP / RSTP / MSTP
QoS	Traffic classification based, Strict priority and WRR 8-level priority for switching 　- Port Number  　- 802.1p priority 　- 802.1Q VLAN tag 　- DSCP/TOS field in IP Packet
IGMP Snooping	IGMP (v1/v2/v3) Snooping, up to 255 multicast groups IGMP Querier mode support
MLD Snooping	MLD (v1/v2) Snooping, up to 255 multicast groups MLD Querier mode support
Access Control List	IP-based ACL / MAC-based ACL Up to 256 entries
Bandwidth Control	Per port bandwidth control 　Ingress: 100Kbps~1000Mbps 　Egress: 100Kbps~1000Mbps
Layer 3 Functions
IP Interfaces	Max. 128 VLAN interfaces
Routing Table	Max. 32 routing entries
Routing Protocols	IPv4 Static Routing IPv6 Static Routing