Planet 4-Port Coax + 2-Port 10/100/1000T + 2-Port 100/1000X SFP Long Reach POE over Coaxial Managed Switch (-40 to 75 C) with IP30, Industrial IPv4/IPv6,

Specifications

Hardware Specifications
Ethernet Interfaces	■ Copper: • 2 x 10/100/1000BASE-T RJ45 • Auto-negotiation/ Auto-MDI/MDI-X ■ Fiber Optic: • 2 x 100/1000BASE-X SFP slot • Supports 100/1000Mbps dual mode and DDM ■ Jumbo Frame • 10Kbytes with GE1 to GE4
Long Reach PoE Interfaces	■ Connectivity: • 16 x BNC female connectors • Long Reach PoE over coaxial PSE (Power Source Equipment) 　- BNC center pole : DC+/Hi 　- BNC shield : DC -/Lo ■ Power Output: • Per port 52V DC, 36 watts (max.) ■ Total Power Budget: • 440 watts (max.) @ 25 degrees C • 380 watts (max.) @ 50 degrees C ■ Cabling: • Coaxial cable: 75 ohm • RG-6/U cable (Recommended) ■ Maximum Distance: • Max. 200m with PoE+ output (656ft.) • Max. 400m with PoE output (1,312ft.) • Max. 1200m without PoE output (3,937ft.) ■ Long Reach Ethernet Standard: • IEEE 1901 ■ Modulation Type: • Wavelet-OFDM ■ Security: • 128-bit AES encryption ■ Frequency Band: • 2 ~ 28MHz ■ Performance: RG-6/U Distance Data Rate* LRP-101CE PoE Output@25 degrees C* TX** RX** 200m 74.8Mbps 81.7Mbps 19.8W 400m 62.5Mpbs 75.2Mbps 15.8W 600m 57.8Mbps 70.3Mbps 11.8W 800m 41.7Mbps 67.1Mbps 7.9W 1000m 31.7Mbps 58.8Mbps 6.7W 1200m 14.9Mbps 22.5Mbps --- * The actual data rate and PoE output vary on the quality of the copper wire and environmental factors. The performance result above is based on the testing via the RG-6/U coaxial cable. ** TX: The LRP-1622CS to the LRP-101CE; RX: The LRP-101CE to the LRP-1622CS ■ Multiple Nodes： • Up to 4 LRP extenders within 1km RG-6/U coaxial cable* * The actual extender nodes vary on the quality of the copper wire and environmental factors. ■ LRP Compatibility： • LRP-101CE: 1-Port 10/100TX PoE PSE + 1-Port Coax Long Reach PoE Extender
Console	1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture	Store-and-Forward
Switch Fabric	11.2Gbps/non-blocking
Address Table	8K entries
Shared Data Buffer	4.1 megabits
Flow Control	IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex
Reset Button	< 5 sec: System reboot > 5 sec: Factory default
LED	PWR, SYS, LNK, PoE-in-Use, 1000, LNK/ACK, Fan 1 Alert, Fan 2 Alert, PoE PWR Alert
Dimensions (W x D x H)	440 x 300 x 44.5 mm, 1U height
Weight	4,430g
Power Requirements	AC 100~240V, 50/60Hz, auto-sensing
ESD Protection	6KV DC
Power Consumption	540 watts/1843 BTU
Enclosure	Metal
Layer 2 Functions
Port Mirroring	TX/RX/both Many-to-1 monitor
VLAN	802.1Q tagged-based VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP
Link Aggregation	IEEE 802.3ad LACP and static trunk Supports 4 trunk groups with 4 ports for each group
Spanning Tree Protocol	STP/RSTP/MSTP
IGMP Snooping	IGMP (v2/v3) Snooping IGMP Querier Up to 256 multicast groups
MLD Snooping	MLD (v1/v2) Snooping, up to 256 multicast groups
Access Control List	IPv4/IPv6 IP-based ACL/MAC-based ACL
QoS	8 mapping ID to 8 level priority queues - Port number - 802.1p priority - 802.1Q VLAN tag - DSCP field in IP packet Traffic classification based, strict priority and WRR
Security	IEEE 802.1X port-based authentication Built-in RADIUS client to co-operate with RADIUS server RADIUS/TACACS+ user access authentication IP-MAC port binding MAC filter Static MAC address DHCP Snooping and DHCP Option82 STP BPDU guard, BPDU filtering and BPDU forwarding DoS attack prevention ARP inspection IP source guard
Management Functions
Basic Management Interfaces	Web browser / Telnet / SNMP v1, v2c Firmware upgrade by HTTP/TFTP protocol through Ethernet network Remote/Local Syslog System log LLDP protocol SNTP
Secure Management Interfaces	SSH, SSL, SNMP v3
SNMP MIBs	RFC 1213 MIB-II RFC 1215 Generic Traps RFC 1493 Bridge MIB RFC 2674 Bridge MIB Extensions RFC 2737 Entity MIB (Version 2) RFC 2819 RMON (1, 2, 3, 9) RFC 2863 Interface Group MIB RFC 3635 Ethernet-like MIB