Planet 16* 10/100/1000TP + 4* 100/1000F SFP Full Managed Ethernet Switch, IP30 Industrial (-40 to 75 degree C, 2*DI, 2*DO)

Specifications

Hardware Specifications
Copper Ports	16 10/ 100/1000Base-T RJ45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots	4 1000Base-SX/LX/BX SFP interfaces (Port-17 to Port-20) Compatible with 100Base-FX SFP
Console	1 x RJ45 serial port (115200, 8, N, 1)
Switch Architecture	Store-and-Forward
Switch Fabric	40Gbps / non-blocking
Throughput (packet per second)	25.6Mpps
Address Table	8K entries, automatic source address learning and ageing
Shared Data Buffer	4Mbits
Flow Control	IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex
Jumbo Frame	9Kbytes
Reset Button	< 5 sec: System reboot > 5 sec: Factory Default
ESD Protection	6KV DC
EFT Protection	6KV DC
Enclosure	IP30 aluminum case
Installation	DIN rail kit and wall-mount kit
Connector	Removable 6-pin terminal block for power input Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 0 & DI 1; Pin 3/4 for DO 0 & DO 1; Pin 5/6 for GND
Alarm	One relay output for power failure. Alarm Relay current carry ability: 1A @ 24V AC
DI/DO	2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V) 　　　　　　　　　　Level 1: 2.1V~24V (±0.1V) 　　　　　　　　　　Input Load to 24V DC, 10mA max. 2 Digital Output (DO): Open collector to 24V DC, 100mA (max.)
LED Indicator	System:  　　　Power 1 (Green) 　　　Power 2 (Green) 　　　Fault Alarm (Green) 　　　Ring (Green)  　　　R.O. (Green)  Per 10/100/1000T RJ45 Port:  　　　1000 LNK/ACT (Green) 　　　10/100 LNK/ACT (Orange) Per SFP Interface: 　　　1000 LNK/ACT (Green) 　　　100 LNK/ACT (Orange)
Dimensions (W x D x H)	72 x 107 x 152 mm
Weight	1043g
Power Requirements	12V to 48V DC 24V AC
Power Consumption	8 watts / 27BTU (System on) 17 watts / 57BTU (Full loading)
Layer 2 Functions
Basic Management Interfaces	Web browser, Remote Telnet, SNMPv1, v2c, local console
Secure Management Interface	SSH, SSL, SNMPv3
Port Configuration	Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow Control disable / enable Power saving mode control
Port Status	Display each port’s speed duplex mode, link status, Flow control status. Auto negotiation status, trunk status.
Port Mirroring	TX / RX / Both Many to 1 monitor
VLAN	802.1Q tagged-based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4095 VLAN IDs
Link Aggregation	IEEE 802.3ad LACP / Static Trunk Support 10 groups of 8-Port trunk support
QoS	Traffic classification based, strict priority and WRR 8-level priority for switching 　- Port Number  　- 802.1p priority 　- 802.1Q VLAN tag 　- DSCP/TOS field in IP Packet
IGMP Snooping	IGMP (v1/v2/v3) Snooping, up to 255 multicast Groups IGMP Querier mode support
MLD Snooping	MLD (v1/v2) Snooping, up to 255 multicast Groups MLD Querier mode support
Access Control List	IP-Based ACL / MAC-based ACL Up to 256 entries
Bandwidth Control	Per port bandwidth control ■　Ingress: 500Kbps~1000Mbps ■　Egress: 500Kbps~1000Mbps
SNMP MIBs	RFC-1213 MIB-II IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Group 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB  IEEE 802.1X PAE LLDP MAU-MIB
Layer 3 Functions
IP Interfaces	Max. 8 VLAN interfaces
Routing Table	Max. 32 routing entries
Routing Protocols	IPv4 software static routing IPv6 software static routing