Planet Video over Fiber(FC) converter up to 20KM, a pair include Tx & Rx in package

Specifications

Video Characteristic
Video Channel	1 channel Bi-direction
Signal Mode	NTSC / PAL / SECAM
Video Connector	BNC
Video Input / Output Impedance	75ohm / unbalanced interface
Video Input / Output Voltage	1.0 Vpp / Typical peak-peak value
Video Bandwidth	6.5MHz
Video Digital Bit Width	8/10 bit
Differential Gain(DG)	<1.3% (Typical Value)
Differential Phase(DP)	<1.3° (Typical Value)
SNR Weighted	63dB (Typical Value)
Data Interface
Data Channel	1 channel
Physical Protocol	RS-485
Operation Mode	Simplex
Data Connector	3 pin terminal block with screw clamps
Data Rate	DC-115.2Kbps
Data Distance	RS-485: 0-1200m
Bit Error Rate (BER)	< 10ns
Optical Interface
Optical Connector	FC
Distance	20km for single mode
Optical Wavelength	VF-102-KIT 　VF-102-T：TX: 1310nm, RX: 1550nm 　VF-102-R：TX: 1550nm, RX: 1330nm
Launch Power (dBm)	VF-102-KIT 　Max. : -7, Min. : -14
Receive Sensitivity (dBm)	-32
Max. Input Power (dBm)	0
Cable	50/125μm or 62.5/125μm multi-mode cable 9/125μm single mode cable
Hardware Specifications
LED Indicators	• One Power • One for Video 　- Green, Link • One for Fiber Optic 　- Green, Link
Dimensions (W x D x H)	94 x 70 x 26 mm
Weight	215g
Power Requirements	5V / 2A
Power Consumption	4.8 watts (maximum)
Mechanical	Metal
Installation	Wall-mountable, DIN-rail (with optional kit), chassis installation
Compatible Converter Chassis	MC-700 / MC-1500 / MC-1500R