Planet IEEE802.3at High Power PoE+ Fast Ethernet Injector - 30W (All-in-one Pack)

Specifications

Hardware Specifications
Interface	〝Data〞 Input Port: 1 x RJ45 STP 〝PoE (Data + Power)〞 Output Port: 1 x RJ45 STP AC Input Power Socket: 1
LED Indicator	System: Power x 1 (Green) PoE Port: Active, PoE ready-in-use x 1 (Green)
Network Cable	10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft) 100BASE-TX: 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft) EIA/TIA-568 100-ohm STP (100m)
Data Rate	10/100Mbps
Dimensions (W x D x H)	115 x 62.5 x 31 mm
Weight	182g
Unit Output Voltage	DC 53V, 0.6A
Power Requirements	100-240V AC, 50/60Hz, 0.75A
Power Consumption	30 watts (max.)
Number of Devices that can be powered	1
Operating Temperature	0 ~ 50 degrees C
Storage Temperature	-10 ~ 70 degrees C
Operating Humidity	5 ~ 95%, relative humidity, non-condensing
Storage Humidity	5 ~ 95%, relative humidity, non-condensing
Power over Ethernet
PoE Standard	IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Output	DC 53V/30 watts
PoE Power Supply Type	Mid-span
Power Pin Assignment	4/5(+), 7/8(-)