Planet 1-Port 10/100TX - 2-Port 100Base-FX(SFP) Switch/Redundant Media Converter

Specifications

Ports-Copper	1 x 10 / 100Base-TX port
Ports-Fiber	2 x 100Base-FX port
Optic Interface	SFP
Optic Wavelength	Varying on SFP module
Launch Power (dBm)-Max.	Varying on SFP module
Launch Power (dBm)-Min.	Varying on SFP module
Receive Sensitivity	Varying on SFP module
Maximum Input Power	Varying on SFP module
Redundant Link	Port 1 (Primary) Port 2 (Backup)
Cable-Twisted-pair	10Base-T : 2-Pair UTP Cat. 3, 4, 5, up to 100 m  100Base-TX : 2-Pair UTP Cat. 5, 5e up to 100 m
Cable-Fiber-Optic Cable	■ 50 / 125µm or 62.5 / 125µm multi-mode fiber cable, up to 2km.  ■ 9 / 125µm single-mode cable, providing a long distance of 20 / 40 / 60km or longer (varying on SFP module)
Speed-Twisted-pair	10 / 20Mbps for half / full-duplex  100 / 200Mbps for half / full-duplex
Speed-Fiber-optic	200Mbps for full-duplex
LED Indicators	System: One Power LED  TP Port: One Speed; One LNK / ACT  Fiber Port: One Link / Act
DIP Switches	DIP 1: On 3-port switch mode; Off 2-port redundant DIP 2: On loop back reply enable; off loop back reply disable
Standards	IEEE 802.3, 10Base-T  IEEE 802.3u, 100Base-TX, 100Base-FX  IEEE 802.3x Flow Control
Power Consumption	6.7 watts (maximum)
Power Input	5V / 2A
Dimensions (W x D x H)	97 x 69 x 25 mm
Operating Environment	Operating temperature: 0~50 degrees C Humidity: 10~90% non-condensing
Storage Environment	Storage temperature: -25~70 degrees C Humidity: 10~90% non-condensing