Planet 802.3at (30W) High Power PoE Injector (-40 to 75 C) IP30, Industrial

Specifications

Hardware Specifications
Interface	“Data” Input Port: 1 x RJ-45 STP “PoE (Data+Power)” Output Port: 1 x RJ-45 STP Input power terminal block: 1
LED Indicator	System: Power 1, Power 2, Fault (Green) PoE Port: PoE in Use x 1 (Green)
Network Cable	10Base-T: UTP Cat. 3, 4, 5, up to 100m (328ft) 100Base-TX: UTP Cat. 3, 4, 5, up to 100m (328ft) 1000Base-T: UTP Cat. 5, 5e, 6 up to 100m (328ft)  EIA/TIA- 568 100-ohm STP (100m)
Data Rate	10/100/1000Mbps
Dimensions (W x D x H)	135 x 87.8 x 32 mm
Weight	473g
Unit Input Voltage	24 ~ 48V DC 24V AC
Power Consumption	30 watts max.
Number of device can be powered	1
Installation	DIN rail kit and wall mount ear
Alarm	Provides one relay output for power failure,  Alarm relay current carry ability: 3A @ DC 30V
Enclosure	IP30 slim type metal case
Power over Ethernet
PoE Standard	IEEE 802.3at High Power over Ethernet / Mid-Span PSE
PoE Power Output	DC 56V / 30 watts
PoE Power supply Type	Mid-Span
Power Pin Assignment	4/5(+), 7/8(-)