Planet 802.11n 300Mbps In-Wall Access Point, 802.3af/at PoE PD, supports WAPC series AP controller (EU Type)
Brand: Planet
Product Code: WNAP-W2201A
Reward Points: 13
Availability: In Stock
KD 13.300

Planet 802.11n 300Mbps In-Wall Access Point, 802.3af/at PoE PD, supports WAPC series AP controller (EU Type)

Specifications

Hardware Specifications
InterfacePoE Port: 1 x 10/100Mbps auto MDI/MDI-X RJ45 port (rear panel)
※ IEEE 802.3af PoE PD Port
LAN Port: 1 x 10/100Mbps auto MDI/MDI-X RJ45 port
RJ11 Port: Connect to the telephone through the 4-conductor phone line
PoE802.3af PoE PD, Class 3
AntennaBuilt-in 3dBi antenna x 2
Reset ButtonReset button at side panel
(Press over 5 seconds to reset the device to factory default)
LED IndicatorsPWR/SYS LED
MaterialPlastic
Dimensions (W x D x H)86 x 35 x 86 mm
Weight76g
Power Requirements802.3af/at PoE, 48-56V DC input, 0.35A (max.)
Power Consumption< 10W
Wireless interface Specifications
StandardCompliance with IEEE 802.11b/g/n
Frequency BandEurope -- ETSI: 2.412~2.472GHz
Operating ChannelEurope -- ETSI: 1~13
Channel Width20 or 20/40MHz
Data Transmission Rates■ 802.11n (HT40): 
 270/243/216/162/108/81/54/27Mbps
 135/121.5/108/81/54/40.5/27/13.5Mbps (dynamic)
■ 802.11n (HT20): 
 130/117/104/78/52/39/26/13Mbps
 65/58.5/52/39/26/19.5/13/6.5Mbps (dynamic)
■ 802.11g: 54/48/36/24/18/12/9/6Mbps (dynamic)
■ 802.11b: 11/5.5/2/1Mbps (dynamic)
Transmission Distance802.11n: up to 70m
802.11g: up to 30m
The estimated transmission distance is based on the theory. 
The actual distance will vary in different environments.
Max. RF Power802.11n: 17 ± 2dBm
802.11g: 17 ± 2dBm
802.11b: 18 ± 2dBm
Receiver SensitivityIEEE 802.11b: -92dBm @ 1Mbps; -85dBm @ 11Mbps, PER < 8%
IEEE 802.11g: -88dBm @ 6Mbps; -73dBm @ 54Mbps, PER <10%
IEEE 802.11n: -90dBm @ MCS8; -70dBm @ MCS15, PER <10%
Data RateIEEE 802.11b: 1/2/5.5/11Mbps
IEEE 802.11g: 6/9/12/18/24/36/48/54Mbps
IEEE 802.11n: 300 Mbps in 40MHz mode/150Mbps in 20MHz mode
TX PowerProvides 5-level Tx Power Control (100%, 70%, 50%, 35%, 15%)
Wireless Management Features
Operation Mode■ Standalone AP
■ Managed AP
Wireless Mode■ AP (Multiple-SSIDs)
■ Client
■ Repeater (WDS+AP)
■ Universal Repeater (AP+Client)
■ WDS PtP Bridge
■ WDS PtMP Bridge
Encryption Security■ WEP (64-/128-bit) encryption security
■ WPA/WPA2 (TKIP/AES)
■ WPA-PSK/WPA2-PSK (TKIP/AES)
■ 802.1x RADIUS Authentication
Wireless SecurityWireless MAC address filtering (up to 20 entries)
Supports WPS (Wi-Fi Protected Setup)
SSID broadcast and hide
Wireless Advanced■ Supports WMM (Wi-Fi Multimedia) for better data transmission of video or
 on-line demand
■ Supports wireless schedule
■ Multiple SSIDs: up to 5
■ Wireless Isolation: Enables it to isolate each connected wireless client of 
 a BSSID from communicating with each other
■ IAPP (Inter Access Point Protocol): 802.11f wireless roaming
■ Provides wireless statistics, max. associated station number
Max. Supported ClientsWired: 253
2.4GHz Wireless: 32
LANBuilt-in DHCP server supporting static IP address distribution
Supports static IP and dynamic IP
Supports UPnP
Supports 802.1d Spanning Tree
System ManagementWeb-based (HTTP) management interface
Supports SNTP synchronization
Easy firmware upgrade via HTTP/TFTP (through AP controller)
Easily locate deployed APs through the LED control
Supports SNMP management, LED On/Off control, Schedule Reboot
Supports Smart Discovery Utility, System Log
Supports WAPC series of AP controllers for central management
Max. WDS Peers8
IEEE StandardsIEEE 802.11n (2T2R, up to 300Mbps)
IEEE 802.11g
IEEE 802.11b
IEEE 802.11i
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x flow control
Other Protocols and StandardsCSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP

Networking
Type Access Point
Speed 10, 100
Ports 2
Model Wallmount

Write a review

Note: HTML is not translated!