Planet 8-Port 802.3at PoE+ (10 * 10/100/1000T + 2*100/1000 SFP, 32 * APs controllable) Wireless AP Controller

Specifications

Hardware Specifications
Copper Ports	10 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots	2 1000BASE-SX/LX/BX SFP interfaces (Port-11 and Port-12) Supports 100/1000Mbps dual mode and DDM
Console Port	1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture	Store-and-Forward
Switch Fabric	24Gbps / non-blocking
Switch Throughput	17.76Mpps@64 bytes
Address Table	8K entries, automatic source address learning and ageing
Shared Data Buffer	1392 kilobytes
ESD Protection	6KV
Flow Control	IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex
Jumbo Frame	9Kbytes
Reset Button	< 5 seconds: System reboot > 5 seconds: Factory default
Dimensions (W x D x H)	330 x 200 x 43.5 mm, 1U height
Weight	2kg
LED	Power, fan alert, 10/100/1000 Link / Act per RJ45 port, 100/1000 Link / Act per SFP port, PoE-in-Use for Port 1~ 8
Power Consumption	Max. 320 watts / 1091 BTU
Power Requirements	100~240V AC, 50/60Hz
Enclosure	Metal
Fan	Smart fan x 1 (Speed depending on operating temperature)
Wireless AP Management
Maximum Managed APs	32
Maximum AP Groups	10
Maximum APs per AP Group	32
Compatible Access Points	■ WDAP-C7200AC ■ WDAP-W7200AC
Encryption Security	■ WEP (64/128-bit) encryption security ■ WPA Personal / Enterprise (TKIP / AES) ■ WPA2 Personal / Enterprise (TKIP / AES) ■ Enterprise Class 802.1x
Centralized AP Management	■ AP auto discovery ■ Remote AP power reboot ■ AP auto IP assignment ■ AP group management ■ AP status monitoring ■ AP real-time traffic monitoring ■ AP device name / location editing
Power over Ethernet
PoE Standard	IEEE 802.3af PoE / 802.3at PoE+ PSE
PoE Power Supply Type	End-span
PoE Power Output	Per port 56V DC, max. 30.8 watts
Power Pin Assignment	1/2(+), 3/6(-)
PoE Power Budget	240 watts (max.) @ 25 degrees C 200 watts (max.) @ 50 degrees C
PoE Ability	PD @ 7 watts:8 units PD @ 15.4 watts:8 units PD @ 30.8 watts:8 units
Layer 2 Functions
Port Configuration	Port disable / enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable / enable
Port Status	Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status
Port Mirroring	TX / RX / both Many-to-1 monitor
VLAN	802.1Q tagged based VLAN 802.1ad Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation	IEEE 802.3ad LACP / static trunk 5 trunk groups with each 5-port trunk supported
Spanning Tree Protocol	STP, IEEE 802.1D Spanning Tree Protocol RSTP, IEEE 802.1w Rapid Spanning Tree Protocol MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
QoS	Traffic classification based, strict priority and WRR 8-level priority for switching - Port number  - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet
IGMP Snooping	IGMP (v1/v2/v3) Snooping, up to 255 multicast groups IGMP Querier mode support
MLD Snooping	MLD (v1/v2) Snooping, up to 255 multicast groups MLD Querier mode support
Access Control List	IP-based ACL / MAC-based ACL Up to 256 entries
Bandwidth Control	Per port bandwidth control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps
Layer 3 Functions
IP Interfaces	Max. 8 VLAN interfaces
Routing Table	Max. 32 routing entries
Routing Protocols	IPv4 software static routing IPv6 software static routing
Management Functions
Basic Management Interfaces	Console / Telnet / Web browser / SNMP v1, v2c
Secure Management Interfaces	SSH, SSL, SNMP v3
SNMP MIBs	RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Group 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP Power over Ethernet MIB