Planet 300Mbps PoE Ceiling Mount 11N Wireless Access Point

Specifications

Hardware Specifications
Interfaces LAN	1x 10/100BASE-T, Auto-MDI/MDIX, 802.3af PoE compliant
Interface Wireless	IEEE 802.11b/g/n
PoE	IEEE 802.3af PoE
Antenna	Built-in 3dBi antenna x 2
Reset Button	Reset button on rear panel Press over 7 seconds to reset the device to factory default
LED Indicators	PWR/SYS LED x1
Material	Plastic
Dimensions (Φ x H)	144 x 33 mm
Weight	165g
Power Requirements	Power Supply: DC 12V, 1A Power over Ethernet: IEEE 802.3af PoE, DC 48V, 0.35A
Power Consumption	11.26W (max.)
Wireless Interface Specifications
Modulation Type	Transmission / Emission Type: DSSS / OFDM  Data modulation type: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Frequency Band	2.412~2.484GHz
Operating Channel	America/ FCC: 2.412~2.462GHz (11 Channels) Europe/ ETSI: 2.412~2.472GHz (13 Channels)
Channel Width	20 or 20/40MHz
Data Rate	IEEE 802.11b: 1/ 2/ 5.5/ 11Mbps IEEE 802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps IEEE 802.11n: 300 Mbps in 40MHz mode / 150Mbps in 20MHz mode
Receiver Sensitivity	IEEE 802.11b: -92dBm @ 1Mbps; -85dBm @ 11Mbps, PER < 8% IEEE 802.11g: -88dBm @ 6Mbps; -73dBm @ 54Mbps, PER <10% IEEE 802.11n: -90dBm @ MCS8; -70dBm @ MCS15, PER <10%
RF Power (Intentional Radiator)	20dBm (Max.)
Wireless Management Features
Wireless Modes	Access Point, WDS PtP, WDS PtMP, Universal Repeater
Multiple-SSID	Up to 4
WDS Peer	Up to 4
Encryption Security	WEP (64/128-bit) WPA-PSK (TKIP) / WPA2-PSK (AES) WPA (TKIP) / WPA2 (AES) 802.1x Authentication
Wireless Security	Enable/Disable SSID Broadcast Wireless LAN ACL (Access Control List) MAC filtering
Wireless Advanced	AP Isolation: Enable it to isolate each connected wireless clients Supports 802.11e WMM (Wi-Fi Multimedia)
Max. Supported Clients	Wire: 253 Wireless: 40
System Management	Web-based (HTTP) management interface Supports SNMP v1, v2c Supports Planet Smart Discovery and Centralized Management Utility System Log